Designed for heavy coiled tubing work with excellent performance and low maintenance design
Performance Data
•100,000 lb. Continuous Lifting Capacity (see performance curves)
•50,000 lb. Continuous Snubbing Capacity
•140 feet/min. Maximum speed (Minimum displacement)
•84 feet/min. Maximum speed (Maximum displacement)
•200 Horsepower Continuous (250 Horsepower Intermittent) with 100°F ambient conditions
•1-1/2" through 3-1/2" tubing sizes
•Capable of running new 120,000 psi tubing
•Superior slow speed control (inches per minute)
•Inches per minute smooth operating speed
•100,000 lb. lifting capacity through outer frame
•100,000 lb. lifting capacity from stripper
Drive System
•Deep reduction, purpose built gear drive (Patented)
•Single hydraulic motor input (variable displacement, bent axis piston motor)
•Dual output drive shafts with integral sprockets
•Hard plumbed counterbalance valves
•The outer bearings of the dual drive shafts are grease lubricated
•Tubing odometer for maintenance and inspection requirements
•Dual oil seals on gear drive output shafts for long and reliable service
•Single spring applied/pressure released brake mounted between the hydraulic drive motor and gear drive input pad
Traction System
•Patented "Quick Connect" Gripper System (1-3 seconds required to remove or install a gripper)
•Hardened and Grooved Single Piece Grippers
•Elastomeric suspension system for grippers (Patented)
•"Sealed-for-life" Chain Bearings - Reduced maintenance with no greasing of chain bearings required
•Purpose built and simplified direct down tension chain system
•New (spray type) injector chain lubricating system
•Improved skate entrance design for smoother chain bearing entry into traction system
General Features
•Hub odometer mounted on gear drive output shaft for total footage indication
•Minimum parts count for reduced maintenance
•Narrow width for easier rig access - 65"
•Dual hydraulic load cells standard
•Forklift pockets for yard handling
•Available certified for North Sea service